Products

IDEEI ALLINONE 15kW Solar Inverter 220V+380V Pump Driver | DC 850V MPPT

The IDEEI ALLINONE eliminates the cost and complexity of separate inverters by delivering 220V single-phase power for household appliances and 380V three-phase output for deep-well pumps simultaneously.

98% MPPT tracking efficiency with ultra-wide DC input: 110V – 850V
Compatible with large PV arrays up to 15kW (model dependent)
Maximum Power Point Tracking ensures optimal energy harvest in variable sunlight
Soft-start technology: Eliminates water-hammer and motor stress
Dry-run protection automatically shuts down pump to prevent damage

Available Power Ratings: 15kW

Send Inquiry WhatsApp Quote

⚡ Dual-Output Solar Power System: Home + Irrigation in One Unit

The IDEEI ALLINONE eliminates the cost and complexity of separate inverters by delivering 220V single-phase power for household appliances and 380V three-phase output for deep-well pumps simultaneously. Engineered for off-grid farms and remote industrial sites requiring reliable water pumping and daily power without diesel generators.

Industrial-Grade Features

🔋 High-Efficiency MPPT & Wide Voltage Range

98% MPPT tracking efficiency with ultra-wide DC input: 110V – 850V
Compatible with large PV arrays up to 15kW (model dependent)
Maximum Power Point Tracking ensures optimal energy harvest in variable sunlight

🛡️ Integrated Pump Protection & Automation

Soft-start technology: Eliminates water-hammer and motor stress
Dry-run protection automatically shuts down pump to prevent damage
Built-in VFD functionality—no external output reactor required for pumps up to 120m lift
Frequency ramping (0-50/60Hz) for precise flow control

⚡ Seamless Dual-Output Operation

Independent power paths: 220V household loads and 380V pump run simultaneously without interference
Auto Mode prioritizes home power first, then allocates surplus to pump
Pure sine wave output (THD <3%) safe for sensitive electronics and motors

💰 Cost & Installation Savings

Eliminates separate VFD purchase: Saves $500-1500 in additional hardware
Plug-and-play design reduces installation time by 40%
No external contactors, filters, or reactors needed
IP20 enclosure for indoor installation with robust thermal management

Technical Specifications

Parameter	IDEEI-7.5KW	IDEEI-11KW	IDEEI-15KW
Rated Output Power	7.5 kW	11 kW	15 kW
220V Output (Single-Phase)	220VAC ±5%, 50/60Hz Pure Sine Wave
380V Output (Three-Phase)	380VAC ±5%, 0–50/60Hz (V/F Adjustable)
PV Input Voltage Range	DC 110V – 850V
MPPT Efficiency	Up to 98%
Max Pump Lift Support	120 meters (no external reactor)
Output Terminals	UV: 220V single-phase pump U/V/W: 380V three-phase pump/motor Standard AC Outlet: 220V household
Operation Modes	Power Mode (220V only) \| Pump Mode (380V only) Auto Mode (simultaneous) \| Manual Mode (freq. control)
Waveform	Pure Sine Wave
Protection Rating	IP20 (Indoor installation)
Certification	CE Certified \| ISO 9001 Manufactured

Target Applications

Off-grid farms requiring irrigation + household power
Rural electrification with deep-well water pumping
Agricultural drip/sprinkler irrigation systems
Livestock watering stations with accommodation power
Remote construction sites with tool power + dewatering pumps
Isolated communities with shared water infrastructure

⚠️ Critical Installation Notes

U/V/W terminals are 380V three-phase ONLY — never connect 220V appliances
UV terminal is for 220V single-phase pumps ONLY
Verify pump voltage rating before connection to prevent equipment damage
Professional electrical installation recommended for systems >7.5kW

Frequently Asked Questions

Q: Do I need a separate VFD or pump controller with this inverter?

A: No. The IDEEI ALLINONE has built-in Variable Frequency Drive (VFD) functionality specifically designed for water pumps. It supports soft-start, dry-run protection, and frequency control (0-50/60Hz) natively. For deep-well pumps up to 120m lift, no external output reactor or additional controller is required—saving you significant hardware costs and installation complexity.

Q: Can I run my house electricity and water pump at the same time?

A: Yes. In Auto Mode, the inverter simultaneously delivers 220V single-phase power to your home and 380V three-phase power to your pump. The system intelligently prioritizes household loads first, then directs remaining solar generation to the pump. Both outputs operate on independent circuits without electrical interference, allowing you to power lights, refrigerators, and TVs while irrigating crops.

Q: What size solar panel array do I need for the 15kW model?

A: The IDEEI-15KW accepts DC input from 110V to 850V with 98% MPPT efficiency. For optimal performance, we recommend a PV array between 12kW and 18kW (depending on local sun conditions) with open-circuit voltage (Voc) not exceeding 850V. The wide voltage range provides flexibility for both small arrays (higher current) and large commercial arrays (higher voltage). Contact our technical team for string configuration recommendations based on your specific pump power and daily water volume requirements.

Configure Your Integrated Power System

Get expert sizing assistance and bulk project pricing. Available in 7.5kW, 11kW, and 15kW configurations.

📧 info@vfdinverters.com | 📱 WhatsApp: +86 183 5724 1165

Need Help Selecting a Model?

Our engineers will recommend the right configuration for your application.
📞 +86 183 5724 1165 (WeChat / WhatsApp) | ✉️ info@vfdinverters.com

Send Inquiry WhatsApp