ALLINONE 7.5-30kW Solar Pump Inverter 220V 380V Dual Output

ALLINONE 7.5-30kW Solar Pump Inverter 220V 380V Dual Output view 1

ALLINONE 7.5-30kW Solar Pump Inverter 220V 380V Dual Output view 2

Products

ALLINONE 7.5-30kW Solar Pump Inverter 220V 380V Dual Output

The IDEEI ALLINONE solar pump inverter (7.5kW-30kW) powers a 380V three-phase pump and a 220V household circuit simultaneously from one unit. The 220V output delivers a stable 10A continuous current with automatic overload protection, while 98% MPPT tracking across a DC 110-850V input maximizes solar harvest.

Simultaneous 220V home + 380V three-phase pump output from a single unit — no second inverter or changeover switch
220V household circuit: stable 10A continuous (≈2.2kW) with automatic overload protection above 10A
98% MPPT efficiency across an ultra-wide DC 110V – 850V solar input range
Soft-start VFD control eliminates water-hammer; drives three-phase pumps up to 120m lift
Dry-run, overload, overcurrent and phase-loss protection for harsh field conditions
CE certified, ISO 9001 quality management, 24-month warranty

Available Power Ratings: 7.5kW 11kW 15kW 18.5kW 22kW 30kW

In Stock

220V + 380V Simultaneous Output: One Inverter for Pump and Home

The IDEEI ALLINONE solar pump inverter (7.5kW–30kW) powers a 380V three-phase irrigation pump and a 220V single-phase household circuit at the same time from one unit — no changeover switch, no second inverter. The 220V home output delivers a stable 10A continuous current with automatic overload protection, while the pump output uses 98% MPPT tracking across a DC 110–850V solar input range.

Industrial-Grade Features

Simultaneous 220V + 380V Dual-Output Architecture

True simultaneous output: the 380V three-phase pump terminals (U/V/W) and the 220V household terminals (L/N) work at the same time — irrigation and home power never compete for one output
220V home circuit: stable 10A continuous (≈2.2kW) for lighting, refrigerators, fans and small appliances; if the 220V load exceeds 10A, the inverter starts overload protection automatically to protect itself and your wiring
Independent power circuits mean a pump soft-start never dims your house lights
Seamless switching between Power Mode, Pump Mode, Auto Mode and Manual frequency control

98% MPPT Efficiency & Ultra-Wide Voltage Range

Advanced MPPT algorithm with 98% peak efficiency across a DC 110V – 850V input range
Flexible PV array design: high-voltage strings reduce cable loss on long runs; high-current arrays improve cloudy-day reliability
Real-time maximum power point tracking maintains optimal harvest during partial cloud cover
Oversizing the PV array extends daily pumping hours in morning and evening light

Integrated Pump Protection & Soft-Start VFD

Soft-start VFD technology: eliminates mechanical stress and water-hammer in pipes up to 120m lift
Intelligent dry-run protection with automatic restart after water level recovery
Frequency ramping 0–50/60Hz for precise flow control — match pump output to crop requirements
Overload, overcurrent and phase-loss protection safeguards three-phase motors in harsh field conditions

One Unit Replaces Two Systems

Eliminates a separate home inverter purchase: pump drive and household power supply in a single enclosure
No external output reactors, filters or contactors required — shorter installation time and fewer failure points
Pure sine wave 220V output (THD <3%) is safe for sensitive electronics, TVs and computers
CE certified, manufactured under ISO 9001 quality management, backed by a 24-month warranty

Technical Specifications — ALLINONE 220V+380V Series

Parameter	7.5kW	11kW	15kW	18.5kW	22kW	30kW
Rated Output Power	7.5 kW	11 kW	15 kW	18.5 kW	22 kW	30 kW
380V Pump Output (Three-Phase)	380VAC ±5%, 0–50/60Hz (V/F adjustable), soft-start VFD control
220V Home Output (Single-Phase)	220VAC ±5%, 50/60Hz pure sine wave — stable 10A continuous; overload protection trips above 10A
Simultaneous Operation	Yes — 380V pump output and 220V home output work at the same time on independent circuits
Recommended Pump Size	5.5–7.5 kW	7.5–11 kW	11–15 kW	15–18.5 kW	18.5–22 kW	22–30 kW
PV Input Voltage Range	DC 110V – 850V
MPPT Efficiency	Up to 98%
Max Pump Lift (No Reactor)	120 meters
Output Terminals	U/V/W: 380V three-phase pump/motor L/N: 220V household AC (10A max)
Operation Modes	Power \| Pump \| Auto \| Manual (V/F)
Waveform Quality	Pure sine wave (THD <3%)
Enclosure Rating	IP20 (indoor / weather-protected installation)
Protection Functions	220V output overload protection (trips above 10A) \| Dry-run \| Overload \| Overcurrent \| Phase-loss \| Overvoltage / undervoltage
Certification & Warranty	CE certified \| ISO 9001 quality management \| 24-month warranty

Optimized For

Farms and homesteads that need irrigation and household power from one solar system
Three-phase deep-well submersible pumps from 5.5kW to 30kW (up to 120m lift)
Off-grid homes with lighting, refrigeration and small appliances within the 10A / 2.2kW home circuit
Drip and sprinkler irrigation systems with variable flow requirements
Livestock operations combining water pumping with facility power
Replacement of diesel pump generators to cut fuel and maintenance costs

Critical Installation Requirements

U/V/W terminals deliver 380V three-phase power ONLY — connecting 220V appliances will cause permanent damage
The 220V home circuit is limited to 10A continuous (≈2.2kW). Do not connect high-power devices such as electric water heaters, air conditioners or induction cookers to the L/N output — loads above 10A will trigger overload protection
Verify pump nameplate voltage (380V three-phase) before wiring
Professional installation required for 380V three-phase connections

Frequently Asked Questions

Q: Can this ALLINONE solar pump inverter run my 380V pump and 220V home appliances at the same time?

A: Yes — this is the key difference of the 220V+380V simultaneous model. The 380V three-phase pump output (U/V/W) and the 220V single-phase home output (L/N) operate concurrently on independent circuits, so the pump and the house are powered at the same time without a changeover switch or a second inverter. In Auto Mode the system keeps the home supply stable while allocating available PV power to the pump.

Q: How much can I connect to the 220V home output, and what happens if the load exceeds 10A?

A: The 220V household output provides a stable 10A continuous current (approximately 2.2kW) — enough for lighting, a refrigerator, fans, TV and small electronics. If the combined 220V load rises above 10A, the inverter automatically starts overload protection and limits or cuts the home output to protect itself and your wiring; the 380V pump circuit is not affected. High-power appliances such as electric water heaters, air conditioners and induction cookers must not be connected to the 220V output.

Q: Which power variant should I choose for my pump?

A: Match the inverter’s rated power to your pump’s motor nameplate: the 7.5kW variant drives 5.5–7.5kW pumps, 11kW drives 7.5–11kW, 15kW drives 11–15kW, 18.5kW drives 15–18.5kW, 22kW drives 18.5–22kW and 30kW drives 22–30kW. All variants support three-phase pumps up to 120m lift without an output reactor. The 220V home circuit (10A) is identical across all variants, so choose based on pump size alone. If you are unsure, send us your pump nameplate and we will confirm the correct model within one working day.

Q: Does this solar pump inverter require batteries?

A: No. The ALLINONE runs directly from the solar array during daylight hours — the MPPT controller converts PV power to drive the pump and the home circuit without any battery bank. Batteries are optional only if you need pumping or home power after sunset.

Q: What protection functions are included?

A: The inverter includes 220V output overload protection (trips automatically above 10A), dry-run protection with auto-restart for the pump, motor overload and overcurrent protection, phase-loss protection, and PV overvoltage/undervoltage protection. Combined with soft-start VFD control, these functions protect both the pump motor and the household circuit in harsh field conditions.

Need a Bulk Quote or Model Selection Help?

Standard models can be ordered directly at the listed price. For bulk orders, project configurations, or model selection based on your motor nameplate, our engineering team responds within one working day.

Email: info@vfdinverters.com | WhatsApp/WeChat: +86 183 5724 1165

Power Rate

7.5kw、11kw、15kw、18.5kw、22kw、30kw

Need Help Selecting a Model?

Our engineers will recommend the right configuration for your application.
Tel: +86 183 5724 1165 (WeChat / WhatsApp) | Email: info@vfdinverters.com

Send Inquiry WhatsApp