Elevator inverter prices vary by power, current, motor type, feedback system and controller compatibility. A replacement drive must do more than match the kilowatt number on the old inverter. It must work with the elevator motor, encoder, braking system and control signals.
For this reason, buyers should send both the existing drive information and the motor nameplate before ordering.
Elevator Inverter Price Reference
Current IDEEI 11LIFT listings on vfdinverters.com show the following reference ranges.
| Rated Power | Current Online Price Reference |
| 4kW | About US$110 to US$199 |
| 5.5kW | About US$116 to US$127 |
| 7.5kW | About US$155 to US$399 |
| 11kW | About US$181 to US$191 |
| 15kW | About US$193 to US$205 |
| 22kW | About US$318 to US$334 |
| 30kW | About US$402 to US$418 |
Different listings may represent different configurations, markets or included options. Confirm the exact model, rated current and accessory scope in the formal quotation.
Why Elevator Drives Cost More Than Basic VFDs
An elevator drive controls ride comfort, levelling and torque during starting and stopping. Closed loop operation uses motor feedback to improve speed and torque control. The drive must also coordinate with the brake and elevator controller.
A basic fan or pump drive is not a suitable replacement simply because its power rating is similar. Elevator applications need dedicated functions and careful commissioning.
Information Required for Selection
Existing Inverter
Send a clear photo of the existing model label and wiring terminals. If the old drive is faulty, provide the fault history and explain whether the problem appeared during starting, running, stopping or emergency operation.
Motor Data
Provide motor power, voltage, rated current, rated speed, frequency and motor type. State whether the elevator uses an induction motor or a permanent magnet synchronous motor.
Encoder and Feedback
The encoder type, signal level and resolution must be compatible with the drive and feedback interface. Send the encoder model or a clear label photo when possible.
Elevator Data
The supplier may need the elevator rated load, car speed, roping arrangement and traction machine information. These details help confirm current and torque requirements.
Controller and UPS
Provide the controller brand or signal requirements. If emergency rescue or UPS operation is required, describe the available backup voltage and expected operating sequence.
New Projects and Replacement Projects
New elevator projects allow the controller, motor and drive to be selected as a coordinated system. Replacement projects require closer attention to existing wiring and feedback signals.
For replacement work, do not assume that terminal names are identical between brands. A wiring and parameter conversion plan should be prepared before installation.
Comparing Elevator Inverter Quotations
A complete quotation should identify:
- Drive model and rated current
- Supported motor type
- Encoder interface or card
- Brake control support
- UPS operation requirements
- Communication method
- Included keypad and accessories
- Warranty terms
- Technical support scope
- Production and delivery time
If commissioning support is important, agree in advance on which motor data, parameter files, videos or remote connection information will be provided.
Reducing Replacement Risk
Back up the old inverter parameters before removal when the drive still allows access. Photograph the wiring and label each control cable. Record the motor direction, floor levelling behavior and any recurring faults.
After installation, test the elevator under controlled conditions. Verify motor rotation, brake timing, encoder direction, low speed operation, levelling and emergency functions before normal service.
Local elevator safety rules and inspection requirements remain the responsibility of the installer and project owner. Qualified elevator technicians should complete installation and commissioning.
Frequently Asked Questions
How much does an elevator inverter cost
Current IDEEI 11LIFT listings range from about US$110 for selected 4kW configurations to about US$418 for selected 30kW configurations. Confirm the exact current rating, feedback interface and included accessories.
Can I replace an elevator inverter with another brand
Replacement may be possible, but the motor, encoder, controller signals, brake sequence and safety system must be compatible. A direct terminal for terminal replacement should not be assumed.
What is a closed loop elevator drive
A closed loop drive receives motor position or speed feedback from an encoder. This supports more precise torque and speed control than an open loop arrangement.
Do you need the old inverter model
Yes. The old model, motor nameplate, encoder information and controller details make replacement selection more accurate.
Request an Elevator Inverter Price
Review the IDEEI elevator drive range or send your elevator data for a matching recommendation.
Email: info@vfdinverters.com
WhatsApp and WeChat: +86 183 5724 1165